The EMF-Bioshield® protection system is made of two small spheres (or mini-bulbs) of neutral plastic (25 mm in diameter). They contains solutions of rare earths oxides with specific electromagnetic properties.
The EMF-Bioshield® mini-bulbs are self-sticking and are to be placed respectively on the upper left and lower right corners of the screen frame (see below).
How does it work?
The EMF-Bioshield® system does not need to be plugged into any power source. Its protective action is based on the A_Nox® (“Avoid [VDT] NOXiousness”) technology, which uses the resonance properties of rare earths elements (elements 58 to 71 of Mendeleyev's Periodic Table of the Elements) to create a passive counter-phase resonance. Triggered by the electron beams the VDT uses to refresh its images (at a rate of 60 to 75 times a second) in a linear fashion (starting in the upper left screen corner and ending in the lower right corner), the content of the mini-bulbs creates an electromagnetic barrier around the protected screen. EMF-Bioshield® thus eliminates the harmful biological effects of residual radiation emitted by computer and TV sets cathode ray tubes.
Packaging and installation
The mini-bulbs are delivered in an aluminum tube. They are placed in it in a specific way in order to avoid touching each other, which could otherwise result in their quick de-activation. The letters “A” and “B” are respectively indicated on the base of each mini-bulb. In order to obtain the protective effect, it is imperative that mini-bulb “A” be stuck on the upper left corner of the computer frame, and mini-bulb “B” be placed on the lower right one, as close as possible to the screen itself (not on the screen itself).
Flexible installation
If someone needs to work on computers located in two or more different locations (e.g. home and office), a sticky pad and velcro system allows one to remove and install the mini-bulbs from one screen to another. It is best to always transport the EMF-Bioshield® bulbs in their original aluminum container, using the aluminum ingot to separate the "A" and "B" bulbs. When traveling by plane, it is recommended also to use x-ray proof photo containers or bags. Never leave the two bulbs in direct contact or next to each other , as they would “activate” each other and exhaust their protective capacity in a few hours.
Protection effects
The impact of the EMF-Bioshield® protection system can be felt as early as two weeks after it starts being used, as it allows the body to regain its natural functions and balance by eliminating the PEMR nuisance. In some cases where people are highly sensitive and responsive to radiation, the effect can be immediate. The most typical symptoms such as chronic fatigue, sleeplessness, tiredness, migraines, painful eyes and restlessness are among the first to disappear. For other symptoms such as skin reactions, hormonal disturbances and amenorrhea, a longer period is necessary, usually several months. |
