1) What is the EMF-Bioshield® made of?
2) What is inside the EMF-Bioshield® system’s mini-bulbs?
3) How do the EMF-Bioshield® system's mini-bulbs operate?
4) How long does the EMF-Bioshield® system protection last?
5) Can the EMF-Bioshield® system be used for all TV, videogames and computer screens?
6) Is the EMF-Bioshield® system also necessary for flat screens?
7) Does the EMF-Bioshield® system replace anti-glare screens?
8) Can the efficiency of the EMF-Bioshield® system be measured with a detector?
1. What is the EMF-Bioshield® made of?
The EMF-Bioshield® system is made of two small plastic bulbs and uses the electromagnetic resonance properties of rare earths oxides. The two bulbs are positioned on the upper left and lower right corners of the screen frame (for CRT-based screens).
2. What is inside the EMF-Bioshield® system’s mini-bulbs?
The EMF-Bioshield® system’s mini-bulbs contain some of elements 58 to 71 of Mendeleyev’s Periodic Table of Elements, combined in a specific order and at different temperatures. The exact formula remains a trade secret.
3. How do the EMF-Bioshield® system’s mini-bulbs operate?
The EMF-Bioshield® system’s mini-bulbs resonate passively in counter-phase with the pulsed electromagnetic fields (at low, very low and extremely low frequencies) generated by CRT-based screens. All tests conducted have demonstrated with certainty that the EMF-Bioshield® system eliminates all negative impact from electromagnetic fields on biological matter, without generating any harmful effect for live beings exposed to it.
4. How long does the EMF-Bioshield® system protection last?
With the addition of a safe margin, the EMF-Bioshield® set of mini-bulbs should be replaced after 24 months of use, irrespective of the number of hours the screen was used. Research by the manufacturer has shown that the system works perfectly until it abruptly stops working and loses its ability to resonate. Since there are always some active electromagnetic fields from other sources around, the EMF-Bioshield® system keeps resonating even when the computer or TV is turned off. As a result, it keeps generating counter-phase waves when left outside of its original package (at a minimum, the mini-bulbs should never be left standing next to each other lest they exhaust each other).
5. Can the EMF-Bioshield® system be used for all TV, videogames and computer screens?
Yes.
6. Is the EMF-Bioshield® system also necessary for flat screens?
All tests conducted with the EMF-Bioshield® system were done first and foremost to protect users of CRT-based computer and TV screens. Additional tests are being conducted to establish scientifically whether flat screens are harmful and whether the EMF-Bioshield® system can protect their users, too. So far, empirical tests conducted with electro-sensitive people have shown that the EMF-Bioshield® system seems to work for them, too, and has improved many people’s working conditions.
7. Does the EMF-Bioshield® system replace anti-glare screens?
No. The EMF-Bioshield® system was created to eliminate the biological effects of PEMR (Pulsed ElectroMagnetic Radiation), which are considered as a major source of threat for health. Anti-glare screens are as a rule meant to reduce luminosity, contrast, and reflections on the screen. They are merely comfort add-ons and do not protect users from PEMR.
8. Can the efficiency of the EMF-Bioshield® system be measured with a detector?
In the current state of development of measuring devices, there is no detector capable of measuring anything below 10-6 watts per square centimeter. Several scientists believe that human cells are affected by radiation as low as 10-15 watts per square centimeter. S.E.I.C. merely points out the results of biological tests presented as official communications of and published in international scientific meetings. To our knowledge, the EMF-Bioshield® system is the only protection system that can boast the fact that it was submitted to so many tests with the results in official publications.
